Grunkel PIN-2000 Manual De Instrucciones página 16

WARNING
This appliance is intended for domestic use. Do not use it for commercial pur-
poses. If so, guarantee would be cancelled.
220V ~50Hz / 2000W
Troubleshooting
WARNING
These guidelines are purely for indicative purposes. Do not try to open, repair or
modify the appliance on your own. If so, the guarantee would be cancelled.
Cod. Probable cause
E0 No cookware
E1 Low voltage (<85V)
E2 High voltage (>260V)
E3 Heat sensor failure
E4 IGBT failure
E5 Empty recipient
E6 Overheating protection
Suggested solution
Use an appropiate recipient.
Ensure the voltage is correct according to
the rating label on the appliance.
Ensure the voltage is correct according to
the rating label on the appliance.
Contact the Official Technical Service.
Contact the Official Technical Service.
Allow several minutes until the appliance
has cooled down. Check you are using
appropiate cookware and that it is not
empty. Clean the air vents. If the problem
persists, contact the Official Technical
Service.
Allow several minutes until the appliance
has cooled down. Check you are using
appropiate cookware and that it is not
empty. Clean the air vents. If the problem
persists, contact the Official Technical
Service.
16