Publicidad
Idiomas disponibles
Idiomas disponibles
dangerous even when the dryer is turned off.
- In order to ensure a better protection, it is advisable to
install in the main electrical circuit supplying the local
bath, a device to differential current, not greater than
30mA. Contact your technician for more info.
- Do not keep appliance switched on continously for more
than 2 minutes.
- Bring knob on "0" (OFF) position before inserting the
plug in the socket.
- Do not grab the product near to the air outlet, use the
handle. Keep at least at 5cm from the head
DESCRIPTION PH45
A. Airflow concentrator
D. Cool-shot button
F. 2 speeds control & power switch
OPERATING
The hair dryer model PH45 combines a powerful and reliable motor to various functions for the drying of the
hair.
- Set the power switch (F) to "0" and plug the dryer into the power outlet.
- This dryer operates with 2 speeds, set the button (F) to "I" for lower speed, "II" for high speed.
CAUTION: the air concentrator (A) heats up quickly. When the dryer is running, do not touch
it.
- At the end of drying process, set the power switch (F) to "0" position.
- Let the hairdryer cool down completely. (Approximately 10 minutes)
-
Once the unit is completely cold, store it out of the reach of children.
Temperature control switch
Set the temperature control switch (E) to "I" for setting the airflow at room temperature, "II" for moderately
hot air and "III" for hot air.
Cool-shot
The hair dryer constantly delivers a flow of hot air. Pushing the "Cool-shot" button (D), the
internal resistance will be temporarily disabled and in a few seconds the device will blow air at room
temperature.
Professional AC motor
Thanks to the professional AC motor, the appliance has great efficiency and the airflow is always constant
and powerful.
Diffuser
The product is provided with a diffuser, that gives softness and volume to the hair. Assemble the diffuser by
removing the airflow concentrator (A), fitting it to the air outlet until it clicks.
CLEANING
Unplug the device from the electrical outlet and wait for the complete cooling down of the unit before
starting cleaning operations.
-
Do not immerse the dryer in water, but clean with a slightly damp soft cloth.
-
Periodically clean the air intake inlet (C) with a dry brush in order to avoid the formation of dust,
to ensure a good ventilation of the internal resistance.
B. Main body
E. Temperature control switch
G. Rotating case for the power cord
This device offers the possibility to select the temperature of the airflow.
C. Inlet air opening
H. Air diffuser
11
Publicidad
