Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
PLAY ON USB INPUT
FOR A AND B CHANNEL
1. Switch the appliance on and move the FADER balance control (22) to the channel to be used;
2. Insert a USB memory in the corresponding inputs (2): for channel A and for channel B;
Playback from USB A
3. Playback will start automatically; if it does not, press the
remote control;
4. Press
button (17) on the unit or
on the unit or
button (38) on the remote control to resume normal reproduction;
5. Use the
/Vol- (13),
9
select the tracks you want to play. You can also directly enter the track number to be played using the numeric
keypad (35) on the remote control.
Press the REPEAT (32) key on the remote control once, the display will show "ONE", to continuously reproduce
6.
the same track; press it a second time, the word "ALL" will appear on the display, to continuously play all the
tracks in the folder or USB device.
Note:
•
The player may not support some USB devices, this is due to the incompatibility of some processors.
•
To avoid harmful interference, always connect USB devices directly to the unit, do not use extension
cords.
•
From the computer, format the USB memories in FAT (16 or 32).
PLAY ON SD CARD
FOR A AND B CHANNEL
Refer to the previous paragraph "Playback on USB inputs"; the commands and functions are the same as described
above.
button (39) on the remote control to pause playback, press
/Vol+
(6) buttons on the unit, or the
:
button (18) on the unit or the
(36),
(37)
9
:
15
XF 4500 DJ
Playback from USB B
button (38) on the
button (18)
buttons on the remote control to
Publicidad
