GEHA X12 CD Manual página 9

Idiomas disponibles

INSTALLING SHREDDER

The centre of gravity is located at the top part of the device. Make sure to position

the file shredder on an even surface to prevent it from tipping over.

Never operate the device near sources of heat or cold, or in an overheated, moist

or dusty environment.

Place the device close to a socket and ensure easy access to the socket, in case

the device needs to be unplugged.

First insert the inner container (for CDs/DVDs) into the paper bin.

Place the document shredder on the paper bin. Ensure that it is stable. Take care

not to pinch your fingers between the upper edge of the bin and the cutting unit.

Plug the device into the socket and make sure that the working voltage complies

with the supplying voltage.

IMPORTANT:

The document shredder can only be placed on the bin in one direction. Ensure that the shred-

der is properly positioned on the paper bin.

STRUCTURE AND FUNCTION

OPERATION

Move the slide switch into „AUTO" position. The machine is now in stand-by mode. Insert the

paper, CD/DVD or card vertically into the feed. The device will automatically start to shred

the paper and will automatically switch back into stand-by mode as soon as the shredding

process is completed.

In case of a paper jam, or if you would like to withdraw the paper immediately during the

regular shredding process, please set the slide switch to „REV". The machine will start

reverse rotation and will return the paper that has not been shredded. Then turn the device

off by moving the slide switch to „OFF".

1. 3-Position slide switch for AUTO, OFF and REVERSE mode

2. Power indicator

3. CD/DVD feed

4. Paper/Credit card feed

5. Transparent viewing window

6. Handle bar

7. Waste basket

OPERATING ELEMENTS

The slide switch (AUTO/OFF/REV) on the machine performs the

following functions:

AUTO: position: The machine is ready to operate, shredding starts

as soon as either paper, a CD/DVD or a card is inserted in the

corresponding feed.

OFF: position: the machine is switched off

REV: position: paper can be reversed