Publicidad
Idiomas disponibles
Idiomas disponibles
16
16 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink.
FAUCET FUNCTIONS
17
17 SPOUT FUNCTION
The Spout (17A) can be rotated around the Faucet Body in any direction.
18
18B
HOT
COLD
18A
18 VALVE FUNCTION
By rotating the Lever Handle (18A) away from the Faucet Body (18B), the valve will be
activated allowing water to flow. The water flow will increase by continuing to rotate the
Lever Handle (18A). By rotating the Lever Handle towards you, the water temperature
will decrease to cold flow only. By rotating the Lever Handle away from you, the water
temperature will increased to hot flow only.
Note: Flush faucet before turning on valve (see step 23).
ENGLISH
17A
ON
18A
5
19
19A
19 PULL-OUT OPERATION
The Pull-Out Hose (19A) can be pulled forward to spray water in any direction.
20
20A
20 SPRAY OPERATION
By activating the valve, water will flow in regular stream mode. To activate the spray
mode, press Button (20A) located behind Spray Head (20C). By pressing Button (20B),
the spray pattern will change between spray and stream while the faucet is in operation.
By holding Button (20B), the water flow will pause. The water flow will resume once
Button (20B) is released.
21
21 SOAP DISPENSER OPERATION
To activate Soap Dispenser (21A), press Dispenser Head (21B) to spray liquid soap.
MAINTENANCE & CARE
22
22B
22A
22 SPRAY HEAD REMOVAL
To prevent damage to the internal parts of your faucet from debris that may have collected
in the water lines, it will be necessary to flush the faucet. Flushing requires the removal
of the sSpray Head (22A). To remove the Spray Head (22A), hold metal Hose Fitting
(22B) and turn the Spray Head (22A) counterclockwise.
20B
20C
21B
21A
Publicidad
