Descargar Imprimir esta página

TREVIDEA Girmi FR03 Manual Del Usuario página 11

Publicidad

- When processing fruits, it is recommended to remove
the pit and peel. For a better cleaning, it is recommended
using warm tap water and restricting the use of
detergents. In this case, rinse thoroughly.
- Do not immerse motor unit in water or other liquids;
clean the motor housing with a damp cloth.
Blades and rostrum are very sharp: be careful not to
cut himself during cleaning or when removing the
accessories.
DESCRIPTION FR03
B. Lid
E. Cable and plug
OPERATING
1)
Place the motor unit (G) on a flat and stable surface.
2)
Insert the container (D) on the motor unit (G). Make sure the assembling has taken place in a correct
way, since otherwise the safety device inhibits the product from running.
3)
Place the food in the container (D) without exceeding the maximum capacity of 500ml.
4)
Insert the lid (B) correctly above the container.
5)
Connect the power plug and push the on/off button (F). During use, always keep the lid close, in the case
some food blocks the blades from running, unplug the device before removing it.
The blender model FR03 is ideal for making milkshakes, smoothies, sorbets, sauces, creams, cocktails etc...
This appliance is not suitable for crushing ice, frozen foods, cereals, rice and coffee, as they may damage the
blades.
SAFE MODE
This model has a safety device: the device only works if the container (D) is properly inserted into the motor
block (G). If the glass is removed, or if it is not properly inserted, the motor stops. If it happens, properly
assemble the glass container.
FIRST USE
Remove and install the glass few times without plugging the unit or adding fruits or vegetables. Follow these
steps to make practice. Wash the lid and the jug with warm water and dishwashing liquid. Other accessories
with electrical parts, such as the motor block, must be cleaned with a damp cloth and dry immediately.
CLEANING -
Disconnect the power plug from the electrical outlet.
Do not immerse the motor unit in water, but wash it with a damp cloth and non-abrasive detergent. Also
avoid any infiltration of water into the motor housing.
Container, blades and lid can be washed like everyday crockery with non-abrasive sponge and mild detergent
or in a dishwasher. Dry them thoroughly, before assembling them to the unit.
For a quick cleaning, fill up half the glass with tap water and and turn on the device for a few seconds.
TECHNICAL FEATURES
Power supply: AC 230V
Capacity: 500ml - Safety device
C. Blades
F. On/Off button
~
50-60Hz. Power 170W
D. Gradueted container
G. Motor unit
10

Publicidad

loading

Este manual también es adecuado para:

Bl707a