Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
• The installation for electrical and
plumbing work must be carried
out
by
qualified
according
to
instructions and in compliance
to the local authority regulations.
•Unit has to be installed as
near as possible to the Service
points,
in
order
heat loss along the pipes. To
facilítate
maintenance,
a distance of 50cm for easy
access to the electrical parts.
• This electrical water heaters-
hould be mounted on a solid ce-
ment wall, preferably where it is
cióse to the power source's soc-
kets and water source.
Diagram 3
personnel,
the
installation
to
reduce
allow
Firm cement wall
•Please use our company's fitted
accessories to mount this electric
water heater.
•Befare determining the bolt
hole's
position,
ensure that the heater is more
than 200mm from the ground
or ceiling board. This will leave
space for maintenance when
necessary.
•Assembling
selecting
the
positions, use the inflating bolt to
secure the hanging board firmly,
then hook the electric water
heater. (Diagram 4)
Inflation bolt
04
you
should
method:
After
proper
fixing
Publicidad
