Descargar Imprimir esta página

Pur Line CHE-400 Manual De Usuario página 13

Chimenea eléctrica con mando

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
that switches the heater on automatically, since a fire risk exists if the heater is
covered or positioned incorrectly.
• The appliance must not be moved when hot. Never touch the hot parts with
your bare skin.
• Never immerse the product in water or any other liquids. However should
the appliance accidentally fall into water or have water or any other liquid spilt
over it isolate and unplug the appliance immediately and have it checked by
a qualified person before using it again. Non-observance could cause a fatal
electric shock!
• Do not use the appliance with wet hands, on a damp floor or when the
appliance itself is wet.
CAUTION: There may be some odour coming from the heater for the very first
time you use it. This is normal during the break-in period or after long term
storage. Make sure the heater is in well ventilated area and continue running it
until the odour goes away.
INSTALLATION
• Only for wall mounting or freestanding, NOT recessed mounting.
• Please retain all packaging until you have checked all the parts and the contents
of the pack.
• The pack contains small items which should be kept away from young children.
• We suggest that you open the pack and place all the contents into a container,
therefore reducing the risk of losing any small pieces.
• We strongly recommend that a professional who has experience of fitting such
items should install Wall Fireplace.
• Wall Fireplaces are heavy objects and your safety is dependant on the
construction/strength of the wall to which it is attached.
• At least two people are recommended to install the Wall Fireplace.
• Appropriate wall fixings must be used for stability on this item and for safety
reason.
• Do not connect the appliance until properly fixed to the wall and the instructions
is read fully.
• The screws and plugs supplied with this package are only suitable for SOLID
wall installation. For any walls other than solid, such as cavity, the appropriate
fixings MUST be used.
• Always ensure intended wall area to be drilled is free from hidden electrical
wires, water and gas pipes.
EN
11

Publicidad

loading