Canyon CNS-TWS8B Guia De Inicio Rapido página 16

simultaneously for 4 seconds in order to reset the pairing to the device. Place
the earphones into the charging case. Then repeat the process of pairing the
earphones to a new device (fig. H).
Turning off the earphones (fig. G). To turn off, put the earphones in the
charging case or press and hold the touch button (8) for up to 5 s. Also, if you
are not connected to the device for more than 5 minutes, the earphones
outside of the charging case will turn off automatically.
SAFETY INSTRUCTIONS
WARNING! Set the volume to the minimum level before using the earphones
This will help to avoid hearing damage due to sudden exposure to sound at
maximum volume. Do not use earphones while driving. Protect from high
humidity, water and dust, heat and direct sunlight. Do not drop, disassemble,
or attempt to repair it by yourself. Clean off dirt with a soft, dry cloth without
the use of detergents.
TROUBLE-SHOOTING
The earphones do not connect. Charge the earphones, check the
connection settings of the device. Make sure that the earphones are specified
as the audio output device. Turn the earphones off and on again.
16