Publicidad
Idiomas disponibles
Idiomas disponibles
Fitment
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 4/8") (unless otherwise stated).
Clamps over rubber door frame mouldings.
Please check the rear of this manual for
information relating specifically to your
vehicle.
Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
Tighten adjusting screw to 5 Nm (3.7 ft lb).
7
Publicidad
