Battery Installation; Battery Status - Genie 3606 EDS Manual Del Usuario

GB DIGITAL SCALE
OPERATING MANUAL INTRODUCTION
Congratulations on your purchase of the GENIE Digital Scale. This is a precision instrument designed
specifically to provide reliability, durability, and outstanding performance. In order to ensure the scale
continues to deliver peak performance, please read these operation instructions carefully and
thoroughly prior to initial usage.
IMPORTANT
1. Place the scale on an even surface for a secure stand.
2. The manufacturer does not warrant this unit to be waterproof. Do not expose this product to
rain or moisture.
3. Avoid contact with too much dirt and dust as well as impacts.
4. Do not use the scale under sun or keep it away from heating appliances such as oven, stove,
etc.
5. Be aware of the correct polarity (+/-) when changing the battery.
6. If you do not use the device for a longer period, we suggest taking out the batteries.
7. Use the scale for its intended purpose only.
Note: The display value may be affected by electromagnetic influences, e.g. when a radio is operated
in the immediate vicinity of the device. The product can be used for its intended purpose again when
the interference is discontinued, but may need to be switched on again to re-start
.

BATTERY INSTALLATION

1. Turn the entire scale upside down and reset it securely on a firm, flat surface.
2. Remove the battery door.
3. Install one "CR2032" battery in the battery compartment, ensuring that the positive side faces
upward.
4. Close the battery door.

BATTERY STATUS

When the low battery symbol appears on the LCD screen, it indicates that the battery is low. Open the
battery compartment and replace the old batteries with new ones. Used batteries must not be
disposed of as household waste. Do not incinerate batteries because they might explode at high
temperature. Contact your local authority for information concerning reclamation and disposal of
batteries. When replacing batteries, always use brand new batteries of the same type.
PART AND KEY DESCRIPTION
1) Scale Platform
2) Liquid Crystal Display (LCD) Panel
3) g/oz Unit Conversion Key
4) On/Tare/Off Key
5) Battery Door and Compartment
5