Descargar Imprimir esta página

EZiclean CYCLOBOOST R610 FLEX Manual De Instrucciones página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
CLEANING THE DUST COLLECTOR
Switch off the appliance before cleaning.
Press the button on the manifold
It is also possible to remove the
to open and empty it.
the collector by pulling the ring
to completely empty and clean it.
The dust collector can be run under clean water to clean it.
Just be sure to let it dry for 24 hours and make sure it is completely
that it is completely dry before reinstalling it.
CLEANING THE FILTER
Switch off the unit before cleaning. Remove the dust collector by pulling the ring.
Clean the filter with clean water or a little neutral detergent by rubbing it lightly.
Wait at least 24 hours until the filter is completely dry before reinstalling it in the collector.
Please note: the filters of this appliance cannot be machine
washed. They cannot be dried with a hair dryer. We strongly
advise against scrubbing the filters with a brush to avoid
damaging them.

Publicidad

loading

Productos relacionados para EZiclean CYCLOBOOST R610 FLEX

Este manual también es adecuado para:

Cycloboost r serie