Leifheit 80029 Manual Del Usuario página 5

Product components / Parts list
[1] Main body
[2] Foil
[3] In three stages adjustable protective cap
[4] On-/Off-switch
[5] Lint box
[6] Brush
[7] Batteries
Prior first use
Remove all packaging material.
Clean the appliance with a mild, damp cloth.
Operation
1. Open the battery cover.
2. Insert two batteries (2 x AA) with regards to their polarity, then restore the battery cover.
3. Remove protective cap.
4. Screw the foil tightly.
5. Push the switch to '1' to start, to '0' to stop.
6. Move the trimmer on sensitive cloth gently.
7. Pull the fluff before starting to cut with the lint remover, so it is easier to remove the fluff and
get a better result.
Tips for using
1. Before first use, it is recommended to try the product on an inconspicuous area of the garment
/ cloth to prevent any possible damage.
2. Make slow and steady moves when you use it.
3. Use the protective ring for:
- Sensitive textiles
- Textiles with long lint and fuzz
ATTENTION!
1. Do not put strong pressure on foil.
2. Damaged foil must be replaced immediately.
3. Do not wash with water, avoid storage in moist place.
4. Screw the foil tightly. Do not turn on the trimmer when the foil is loosen.
5. Do not use on an item of clothing when it is being worn; injury to self may happen.
6. Use this item exclusively for removing lint.
7. Do not use on places that are not mentioned in this instruction manual.
8. Not suitable for shaving body hair.
Cleaning and care
Attention! Do not clean the product under running water. When the lint box is around 80% full, turn off
the appliance. Clean the lint box and the inner cutter.
Following a detailed instruction:
1. Turn off the lint remover.
2. Remove the protective cap if applicable.
3. Screw the foil to take it off.
4. Clean the foil and the inner cutter with the brush.
5. Clear out the lint box.
6. Reassemble the inner cutter.
7. Screw the foil onto main body.
ATTENTION!
The foil is very thin! If you handle it improperly, it can be damaged easily. To avoid personal injury, do
not use the lint remover if it has a damaged foil or inner cutter.
Storage
Store the product in a dry and dust free place and at room temperature.