OZU WELL-BEING Serie Manual De Instrucciones página 29

CH2 by " " "+""-"buttons.
4.It has safety protection function. When electrode patches are not well
attached or lose e ect,only 1-degree intensity is allowed. If losing e ect, users
are suggested to replace new patches otherwise intensity could not be
strengthened. Once shift mode, intensity returns to 1. Users need
to reset by the most comfortable feeling.
5.Working time of selected channel could be adjusted by long pressing "CH",
each long pressing will add 5 minutes, the longest is 30 minutes.
Each startup, the default time is 15 minutes, CH1, mode 1 and intensity "0".
After 1minutes without any operation, device will turn o automatically
5.4 After usage
-
After using the low-frequency therapy stimulator, please paste the electrode
patches on storage plate and store in dry, ventilated place for next use.
5.5 Treatment drawing of common disease
-
Treat
scapulohumeral
periarthritis
6. Maintenance and storage
6.1 Cleaning and maintenance
-
1)When the host is dirty, use dry soft cloth or dry towel to wipe it.
2)Keep the surface of electrode patches clean, avoid dust, oily matter, viscous
matter, or else the viscidity of electrode patches will lower. When the surface
of electrode patch is dirty, use water to clean it and dry it before use it again.
3)User does not need to calibrate or maintain the stimulator, and is prohibited
from opening, disassembling and maintaining the stimulator arbitrarily. If
there's something wrong, please contact the dealer for maintenance.
4)Please take out the batteries if the stimulator is not to be used for a long
time.
Treat chronic lumbar
strain
EN - 10
Treat arthritis