3
STEP 6:
Size The Hose
For best results:
With the cleaner running and submerged, pull hose
to furthest end of the pool. The hose should extend
to the furthest point in the pool, plus one section.
Add or remove hose sections as needed.
Note: The hose is designed for use with the cleaner.
Use of a different type of hose will reduce the clean-
er's performance.
Step 7:
Pool Coverage
Factory setting is set at #0. When watching the cleaner for the first time, adjust these settings to
ensure complete cleaning coverage. See Fig. 5.
Large Circles
Moderate Circles
Tight Circles
Clockwise
Clockwise
Clockwise
Fig. 5.
'LIL SHARK
Aboveground Pool Cleaner Installation and User's Guide
™