Adler europe AD7404 Manual De Uso página 7

15. The device should be turned off every time you put it down.
16. Do not use the device near water, for example: in the shower, in the bathtub or above the
basin with water.
17. If the device uses a power supply, do not cover it, as it could lead to a dangerous increase
in temperature and damage to the device. Always, first insert the plug into the power socket in
the device and then the power supply to the mains socket.
18. Do not use the bed sheet in folded condition. Do not put pins, needles and other metal
objects in the sheet.
19. Do not use the sheet if it is wet or damp. Leave the sheet hung loosely in a ventilated
area until it is completely dry.
20. Do not put the power cord on a warmed sheet. Do not fold the equipment when it is
placed on top during storage. Check the equipment periodically for signs of wear or damage.
If such signs or equipment are used improperly, please contact your supplier before
continuing to use it.
21. Store in a dry place. Never put heavy objects on the sheet.
22. Never go to sleep with the electric sheet turned on. Unplug the power plug from the outlet.
23. Never cover the controller.
24. Before switching on the electric sheet, make sure that it is evenly distributed, there are no
kinks or folds.
25. Product can be washed in the washing machine in 30°C temperature. Can be washed by
hand. Disconnect the power cord and controller before washing. Switch or controller - the
regulator must not be wet during washing, and during drying the cord must be in a horizontal
position to ensure that the water does not flow into the switch or controller - the regulator.
26. Do not iron the device!
27. This equipment is not intended for medical use in hospitals.
28. The device should cool down before storage.
29. The device may be used only with the types of removable elements specified in the
equipment marking.
30. Do not use the device on adjustable beds or if the device is used on an adjustable bed,
check that the product and cord cannot get stuck or corrugated, eg on hinges.
31. The device is equipped with a fuse protecting against overheating, which should not work
when used in accordance with the intended use of the equipment. If the fuse trips, the device
will stop working, the equipment must be returned to the manufacturer or its representative
for repair.
BEFORE FIRST USE
1.The product needs to be unfolded and laid flat before switching on.
2.We recommend that you switch your product to the maximum setting for 30 minutes before bedtime then reduce to your desired heat
setting. You must switch OFF prior to sleeping.
DESCRIPTION OF THE DEVICE
1. Temperature regulator
3. Hand and foot openings
5. Regulating button
7. Power light
9. Time setting indicator
11. Time setting button
USING THE DEVICE
Connect the power cable to a power outlet. The power light (7) will switch on. Activate the pillow by sliding to the
ON position. The hour-long program with the least intense heating will automatically be selected.
You can change the temperature setting by pressing the temperature setting button (10).
You can change the planned operating time of the electric heating pad by pressing the time setting button (11).
2. Cover
4. Controller display
6. Power switch
8. Temperature setting indicator
10. Temperature setting button
12. Reset settings button
7