Publicidad
Idiomas disponibles
Idiomas disponibles
•
The same rules as described in section "controls" apply to
the remote display (including setting of temperature in the
box)
•
Do not use power switch on thermal unit. This switch should
be in position "0" all the time. Use switch on remote control
to operate the unit.
6. Cleaning and maintenance
WARNING: Never allow water or other liquids to enter the themal
unit and electronics.
•
Turn off the product and disconnect all power cables.
•
The VebaBox is not designed for automatic defrosting (not
necessary for normal operation). If excessive frost builds up,
shut off the unit and wait until the ice melts. Do not remove
the ice by mechanic means.
•
Clean the product with a damp cloth using a detergent, if
necessary. NOTE: do not use abrasive or corrosive agents
as these may damage the surface.
•
Carefully dry all remaining damp parts with a dry cloth.
•
The door seals must be greased every three months to
prevent the doors from jamming or cracking. This can be
done with, for example, medical vaseline.
•
Repairs and maintenance must be carried out by qualified
personnel. It is recommended to check the unit and clean
the internal heat exchangers at least once a year.
7. Packaging material and safe disposal of products
The packaging protects the product from transport damage. Store
TUC6000-usm. Rev.00
© 2019 VebaBox B.V. User Manual VebaBox
+TUC6000
16
Publicidad
