Holmatro HVLW 16 S 2 Manual página 22

EN
• Make sure that moving parts do not move unexpectedly.
• Used or leaked fluids, and any other products consumed during the activities, must be collected and
disposed of in a environmentally responsible way.
3 Description
3.1 Equipment
This is a single-acting hydraulic tool with spring return designed to be driven by a Holmatro hydraulic
hand pump or foot pump. The system operates with hydraulic oil at maximum 720 bar.
This tool can be used to lift, among other things, heavy machinery during installation. The lifting wedge
requires a minimum opening of 10 mm and has a lifting capacity of 16000 kg.
3.1.1 Type designation
Example: HVLW 16 S 2
/i
Digit Example Description
1-4 HVLW Holmatro Vertical Lifting Wedge
5-6 16 lifting capacity
7 S S = spring return
8 2 2 = lifting capacity of each step in cm
3.2 Product identification
Refer to Fig. 2.
/i
1 Hand grip
2 Grease nipple
3 Top plate
4 Grease channel
5 Cylinder
3.3 Weight and dimensions
Refer to Fig. 3.
/i
Model Part number
HVLW 16 S 2 100.112.104
3.4 Technical specifications
/i
Item
Working pressure
Maximum lifting force
Lifting capacity of each step
Maximum height on the fourth step
Minimum insertion space
Type of hydraulic oil
22
6
7
8
9
Weight Length (B)
(kg) (mm)
8.8
Unit HVLW 16 S 2
bar
kN
t
mm
mm
mm
916.219.170_006
High-Flow coupler
Guide strip
Safety block
Stepped block
Width (A)
(mm)
337 163
720
156
16
19
51
10
ISO-L HV VG 15/22
Height (C)
(mm)
121
HVLW