operAtion - general
The appliance is intended only for domestic use,
not for professional use.
1. Mouthpiece
2. On/off switch 0-1-2
3. Grid
4. Hinge
5. Hang up loop
6. Power cord and plug
operAtion - Before use for the first time
1. Remove the packaging.
2. Clean all the accessories to remove any residues that may be left from the manufacturing process (see
"Cleaning and maintenance").
T he appliance may emit a characteristic smell when you switch it on for the first time. This is normal and
will stop on its own. Make sure there is sufficient ventilation.
operAtion - Use
1. Make sure that the On/Off switch of the appliance is set to 0 (Off).
2. Insert the plug in the wall socket.
3. Put the On/Off switch (5) on 1. Or for a harder blow power on 2.
D on't put the mouthpiece too close to the hair when the heat switch is on level 2. This way you can
damage your hair.
tip:
•
I n case of real wet hear, it is better to start with
drying on a higher level. Switch the hair dryer on
to a less hot level as the hair become dryer.
•
T o give your hair more volume, you should dry
your hair piece by piece from the beginning of
the hair and pull up. Start blowing just above the
hair. This way your hair will easily stay upward.
And so get more volume.
•
Y ou can get more volume by blowing up against
the hair till it is almost dry. After that blow in the
right direction.
•
D ry your hair in front of the mirror is often a
difficult task. Just try without looking in the
mirror. Bend your head a little bit forward so you
can see what your doing. You will see, it works
quite well!
1
2
5
16
instruction manual
3
4
2
1
0
6
2
1
0