· Put the battery compartment back onto the lower part by putting the
barshaft into the intended opening located at the bottom of the
battery compartment. Pay attention that the contact points match and
firmly press down the battery compartment.
· We recommend storing the mill upright.
ADJUSTING THE DEGREE OF GRINDING
Turn the mill upside down. The adjustment ring is located under the
grinding mechanism. The degree of grinding can be adjusted continuously
with it. Simply turn the adjustment ring until the arrow points to the
desired position - from 1 fine powder to 6 coarsely ground.
Note: If the amount of ground pepper/salt gradually diminishes, this can
have two reasons:
a) The batteries are running down. In this case, please replace the batteries.
b) There are insufficient peppercorns/salt cristals in the mill. In this case,
please lightly shake the device so that new peppercorns/salt crystals
will fall into the grinder, or refill the device if needed.
7