Chauvet Professional Ovation Yoke 8 Guía De Referencia Rápida página 2

Ovation Pole Operated Yoke - 8" Instructions
The Ovation Pole Operated Yoke - 8" is a replacement yoke for Ovation 8" Class Fresnels to allow pan and
tilt from the ground, using a standard operating pole. The Ovation Pole Operated Yoke - 8" is fitted with a
Junior Pin for easy studio mounting by standard receivers. Only for use with Ovation F-265WW,
F-915VW, or F-915FC that have a manufacturing date after March 2019.
What is Included
• Ovation Pole Operated Yoke - 8"
• 4x Small Screws
• Large Screw with Washers
• Collet
• Quick Reference Guide
Overview
Junior Pin Spigot
Setup
1. Remove the original yoke from the fixture.
2. Line up and insert the four small screws through the
bracket with adjustment knobs into the fixture's side
panel.
3. Turn the screws to tighten the bracket to the fixture.
Page 2
Ovation Pole Operated Yoke - 8"
Mounting Bracket
Tilt Adjustment
Knob (white)
Ovation Pole Operated Yoke - 8" QRG Rev. 3
Pan Adjustment
Knob (blue)