Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
6
Attaching the fixture frame
to the top cover
□
Carefully place the each glass sheets (E) into the
fixture frame (F).
□
Align the fixture frame (F) under the top cover (B).
□
Use a Phillips screwdriver to screw the pan
screws (G) into the holes on the top cover (B).
There have holes of the top cover (B) each corner.
Care and Cleaning
□
Clean the fixture with a soft, dry cloth.
□
Do not use any cleaners with chemicals,
solvents or hash abrasives.
Troubleshooting
Problem
The bulb will not light.
The fuse blows or circuit
breaker trips when the light is
turned on.
7
Possible Cause
The power is off.
The circuit breaker is off.
Crossed wires or power
wire is grounding out.
7
Please contact 1-855-HD-HAMPTON for further assistance.
Applying caulk
□ Once the fixture is mounted on the wall, caulk the
space between the wall and the upper 3/4 area of
the wall plate (I).
□ Leave the bottom 1/4 area uncaulked for drainage
of any water which might leak into the enclosure.
WARNING: Before attempting to clean the fixture,
disconnect the power to the fixture by turning the
breaker off or removing the fuse from the fuse box.
Solution
Ensure the power supply is On.
Ensure the circuit breaker is in the On position.
□
Check the wire connections.
□
Contact a qualified electrician or call the
Customer Service Team at
1-855-HD-HAMPTON.
HAMPTONBAY.COM
Publicidad
