SOMFY Sonesse 28 WF Zigbee Li-ion Manual De Instrucciones página 15

Sonesse 28 WF Zigbee Li-ion
Using the favourite position (my)
▪ If a favourite position (my) is programmed, briefly press the my button on the
control point twice in succession to move the motorised product to the
favourite position (my).
3.3.Tips and advice on operation
3.3.1.Questions about the product?
Observations
The motorised product does not
operate.
The motorised product stops before its
end limit.
NOTICE
If the motorised product still does not work, contact a drive and home automation professional.
3.3.2.Upgrading a TaHoma ready installation into a TaHoma switch installation
To add a TaHoma switch into a TaHoma ready installation, and then upgrade the installation into a TaHoma switch
installation, follow the instructions on the TaHoma application.
©
Copyright 2023 SOMFY ACTIVITES SA. All rights reserved.
Possible causes
The control point battery is low.
Drive battery is low and requires charge.
Red LED blinks 3 times when any button
of a paired control point is pressed.
The thermal protection has activated.
Drive battery is low and requires charge.
Red LED blinks 3 times when any button
of a paired control point is pressed.
x 2 =
Solutions
Check the battery and replace it as
required.
Plug in the charger.
Wait for the drive to cool down.
Plug in the charger.
EN
15