Roadstar RU-400RD Manual De Instrucciones página 8

16. SD / MMC SLOT-IN
1. Press (14) button to open the front panel.
2. Insert the SD/MMC card into the card slot.
3. Attach front panel back to the head unit. Playback starts automatically.
17. PAUSE BUTTON
During "PLAY", press (17) 'PAUSE' button to "PAUSE". Press it again to resume play.
18. INTRO BUTTON (MP3 SCAN)
When this button is pressed, 'SCN' indication is displayed and the first several seconds
of each track of the disc are played. Press again to stop intro and listen to track.
19. REPEAT BUTTON 'REPEAT'
When this button is pressed, 'RPT' indication is displayed and play of the selected track
will be continually repeated until the Track repeat mode is cancelled by pressing 'RPT'
button again.
20. RANDOM BUTTON 'SHUFFLE'
When this button is pressed, 'SHF' indication is displayed and each track of the disc are
played in random instead of normal progression. To cancel RANDOM mode, press
'SHF' button (20) again.
21. RESET BUTTON
Reset button (25) is placed on the housing.
The reset button is to be activated for the following reason:
• Initial installation of the unit when all wiring is completed.
• All the function buttons do not operate properly.
• Error symbol on the display.
22. AUX IN
Aux In Port Convenient easy to use front "AUX IN" input jack, allows easy connection of
Portable Media and other digital MP3 Players.
English 11 12 English
ID3 Tag
Press DISPLAY button repeatedly to Display ID3 TAG information.
If the MP3 file is available with ID3 TAG, pressing the display button repeatedly will
show information in the following sequence:
SONG TITLE > ARTIST> ALBUM TITLE > YEAR> COMMENTS
If any of the ID3-TAG information is not available, pressing the DISPLAY button re
peatedly will show information in the following sequence:
UNKNOWN SONGNAME> UNKNOWN ARTIST> NO ALBUM TITLE > UNKNOWN
YEAR > NO COMMENTS
If the MP3 file is without ID3 TAG, pressing the DISPLAY button, "NO ID3 TAG" will be
displayed.
The file name & track number of the MP3 file will scroll repeatedly through the display
during the playing of the MP3 file.
SPECIFICATIONS
TUNER
Sensitivity 2 dBμ
Stereo separation 35 dB
Signal to noise radio 55 dB
Frequency range 87.5-108 MHz
Channel step 50 kHz
Intermediate frequency 10.7 MHz
LINE-OUT
Output 350mV max.
Impedance 10kOhm
GENERAL
Power Supply 13.8V DC
(10.8-15.6V allowable)
Speaker impedance 4 or 8 ohm
Output power 25 W RMS x 4CH
Note: Specifications and the design are subject to possible modification without notice due
to improvement.