BGS technic 7873 Manual página 4

SPECIFICATIONS
Rated load: 3000 kg
Lifting height: 75 - 510 mm
Overall dimension: 648 x 153 x 344 mm
Front wheel dimensions: Ø 60 x 46 mm
Rear wheel dimensions: Ø 60 x 30 mm
Pump lever length: 1247 mm
Lifting pad diameter: 110 mm
Net weight: 28.8 kg
WARNING
• Read, study, and understand all warnings and operating instructions prior to use
• Do not overload this jack beyond the rated capacity.
• This jack is designed for use only on hard level surfaces capable of sustaining the load.
Use on other than hard level surfaces can result in jack instability and possible loss of load.
• This is a lifting device only. immediately after lifting, support the vehicle with jack stands
• Do not get under or allow anyone under the vehicle until it has been supported by jack stands.
• Do not move or dolly the vehicle while on the jack.
• Lift only on areas of the vehicle as specified by the vehicle manufacturer.
• Center the load on saddle prior to lifting.
• No alterations to the jack shall be made.
• Keep children and unauthorized persons away from the working area.
• Do not let children play with this tool or its packaging.
• Ensure the working area has adequate lighting
• Keep working area clean and tidy, dry and free from unrelated materials
• Do not allow untrained persons to use this tool kit
• Always wear eye protection and gloves when working with the tool.
• Failure to heed these warnings may result in personal injury and / or property damage.
• Inspect before each use.
SYMBOLS
Note: Do not remove any safety signs, stickers, or labels from the product. Keep all safety signs, stickers
and labels in legible condition. The following safety signs and signs are attached to the product /
packaging:
Symbole
Length
Min. saddle height
Max. saddle height
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Floor Jack, hydraulic, 3.0 t
Description
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Symbole
Max. load 3.0 T
Read instruction manual before use
Suitable for lifting vehicles
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 7873
Description