Before Use / Charging; Operation With Attachment Comb - Unold 87853 Manual De Instrucciones

BeFore uSe / chargIng

1. Remove all packaging materials and transport safeguards.
Due to danger of suffocation, keep children away from
the packaging materials.
2. The appliance is not yet ready for use when it leaves the
factory; it must first be completely charged.
3. Connect the power cord to the charging station.
4. Plug the mains plug of the power cord into an electrical
outlet (220 V~, 50/60 Hz).
5. Ensure that the appliance is switched off.
6. Place the switched-off appliance in the charging station.
Ensure that the appliance is inserted correctly, otherwise
it cannot be correctly charged.
7. Ensure that the charging station is stable.
8. Connect the jack plug of the power cord to the socket of
the charging station.
9. The charging time is at least 16 hours (overcharging is
technically impossible).
10. Now the appliance is ready for operation.

oPeratIon wIth attachment comB

1. Ensure that the appliance is charged.
2. If you want to use the attachment comb, fit it onto the
appliance (see illustration). Hold the appliance firmly
with one hand, with your other hand fit the attachment
comb onto the appliance by inserting it onto the shaving
head from above. The comb must audibly click into
place, only thereafter is the comb properly seated on the
appliance.
3. You can select from three cutting lengths (2, 4 and 6
mm). For selection, slide the attachment comb into the
desired position.
4. Switch on the appliance via the "ON/OFF" button.
Caution: The blades of the shaving head are sharp -
danger of injury!
Place the appliance with the attachment comb on the
skin, if possible always work counter to the direction of
hair growth.
5. Cut the hair to the desired length. If hair is very long, we
recommend that you first cut it with scissors.
6. When cutting hair with the appliance, always pause and
check the result. Thus you avoid cutting off too much
hair.
7. If hair has been caught in the shaving head, switch off
the appliance and clean the shaving head, as described
in the chapter, "Cleaning and care".
caution: You can also use a conventional type
aa battery (1.5 v) to operate the appliance.
however, only use such a battery if the appliance
is completely discharged, to prevent damage to the
appliance.
15