Operation - Hair Trimmer - Unold 87853 Manual De Instrucciones

8. When you are finished cutting hair, switch off the
appliance via the ON/OFF button.
9. Clean the appliance after every use.
caution: the blades of the shaving head are sharp -
danger of injury!

oPeratIon - haIr trImmer

To obtain an optimal result, always work counter to the
direction of hair growth. If you tension the appropriate part of
your skin with your other hand, it is easier to shave. To avoid
skin irritation, after shaving we recommend that you apply
cream to body parts from which hair has been removed. If
you have extremely sensitive skin or are removing hair from
sensitive parts of your body, we recommend that you only
move the appliance one time over this area to avoid skin
irritation.
1. Ensure that the appliance is charged.
2. Pull the attachment comb off of the appliance by
carefully pulling it down and off of the shaving head.
3. Ensure that the skin is clean and dry before you start
shaving.
4. Switch on the appliance via the "ON/OFF" button.
5. Place the appliance on the skin, if possible always work
counter to the direction of hair growth. Do not exert any
pressure on the appliance.
6. Legs: Shave, starting from the ankles upwards against
the direction of hair growth.
7. Arms: In this case shaving is most successful if you
shave from the outside to the inside of the arm.
8. Axles: Hold your arm up as high as possible to tension
the skin. Shave the appropriate point with back and forth
movements.
9. Intimate area: You can pre-cut extremely long hair with
the attachment comb. To do this fit the attachment comb
onto the appliance. If necessary tension the portion of
the skin to be shaved and move the appliance slowly over
the skin in the direction opposite of the direction of hair
growth.
10. Beard contours: Cut the hair carefully according to the
contour that you desire.
11. Ensure that the shaving head always has contact with
the skin. If you tension the part of your skin you want to
shave, with your other hand, it is easier to shave.
12. If hair has been caught in the shaving head, switch off
the appliance and clean the shaving head, as described
in the chapter, "Cleaning and care".
13. When you are finished cutting hair, switch off the
appliance via the ON/OFF button.
14. Clean the appliance after every use.
15. After shaving, do not apply skin care agents that contain
alcohol on the skin because these agents can cause skin
16