Publicidad
Idiomas disponibles
Idiomas disponibles
FILTERS AND FILTER
OPERATION
The Dustblocker 700 separates the dust in
three phases:
During the first phase, the front filter is used. The filter collects the larger dust
particles and protects the Pre and H13/14 hepafilter.
The second phase is a Pre Filter which collects the finer particles and protects the
H13/14 hepafilter.
During the third phase, the H13/14 hepafilter is used. This filter will collect the dust
that is dangerous for people's health and that is not visible to the naked eye.
The front filter which sits behind the metal mesh needs to be replaced on a
regular basis according to the contamination of the air in the environment. This will
lengthen the life of the Pre Filter and H13/14 filter.
At the front of your Dustblocker you will see a Pre Filter. If the machine is used
daily we recommend changing it twice a year. Of course this depends on the
contaimination of the air in the environment. If you regularly replace your Pre Filter
you will lengthen the life of the hepafilter.
It is simple to change the filter by
removing the two lock pins at the sides
and pull the filter out. At the top of the
Pre Filter you will find a label with the
item number (Compare this number
with the number on the old filter).
Make sure that you place the filter as
indicated on the label :
8
DB 700
Airflow
MAX-VAC.COM
Publicidad
