Publicidad
USB 3.0 HZ-3A Docking Station User Guide
Connecting to the Internet
Use an RJ-45 cable to connect your docking station to a local area network (LAN) (A) or a DSL/cable
modem (B).
The green LED on the LAN port lights up when there is an Internet connection. The yellow LED
lights up when there is Internet activity.
•
If you fail to connect to the Internet using the docking station at your office, check with the
network administrator if the MAC address of the docking station is blocked by your
company's firewall.
•
Check the bottom of your docking station for its MAC address. You may also obtain the
MAC address through the following ways:
1. From the Windows
Prompt.
2. At the command prompt, key in ipconfig/all and then Press <Enter>.
3. Locate ASIX AX88179 USB3.0 to Gigabit Ethernet Adapter.
•
The RJ-45 cable is purchased separately.
12
RJ-45
RJ-45
Modem
desktop, click Start > All Programs > Accessories > Command
®
A
B
Publicidad
