Operation; Normal Operation Of The Tamper; Tamping Force Adjustment - Puqpress M1 Manual De Instrucciones

1. Insert the power cord in the socket at the back side of the
tamper.
2. Insert the plug into the corresponding grounded outlet.
3. Switch on the tamper using the main switch at the back side
(pos. 12).

5 Operation

5.1 Normal operation of the tamper

1. Actuate the main switch on the back side of the tamper (pos. 12).
2. Insert the port-a-filter entirely in the clamp after initial levelling of
ground coffee in filter basket.
3. The tamper automatically detects the metal port-a-filter using
the contactless sensor.
4. Remove the port-a-filter after a full cycle of approx. 1.5 seconds.

5.2 Tamping force adjustment

The tamping force (kg) can be adjusted on the display at the right
side. For force adjustment use the "+" or "- " button. The force
setting is presented on the display in kilograms (kg) or pounds (lbs).
10
Force setting 'up'
Force setting 'down'