Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
If you have any questions regarding the product, please send e-mail to service@uni-neo.com.
PROBLEM
POSSIBLE CAUSE
not operate.
A circuit breaker is tripped or a fuse blown.
The ON/OFF switch is defective.
There is loose wiring.
The power light is
Light bulbs are not functioning.
effect is not visible.
Loose wiring
The heater is not
Incorrect operation.
operating.
The heater switch is defective.
The heater assembly is defective.
There is loose wiring.
The vents are dirty or clogged.
There is excessive
Dirty or clogged blower.
noise when the
The heater assembly is defective.
heater is operating.
The power light is
Light bulbs are not functioning.
ON but the ember
Loose wiring.
There is excessive
noise when the
against the housing.
heater is OFF.
10
SOLUTION
120V outlet.
Check additional appliances on the circuit; ideally
circuit.
please send e-mail to service@uni-neo.com.
Refer to the operating instructions.
Refer to Replacing the Light Bulbs
please send e-mail to service@uni-neo.com.
Refer to the operating instructions.
please send e-mail to service@uni-neo.com.
Unplug the unit. Clear the vent area of dust and
debris. Wait ten minutes, plug the unit in again and
turn on the heater
Refer to Maintenance of Motors in Care and Maintenance.
please send e-mail to service@uni-neo.com.
Refer to Replacing the Light Bulbs
please send e-mail to service@uni-neo.com.
servicing.
please send e-mail to service@uni-neo.com.
Publicidad
