Publicidad
Idiomas disponibles
Idiomas disponibles
3 YEARS
L I M I T E D WA R R A N T Y
3.7 Changing bits
Adjusting drilling depth
- Holding and guiding the tool
- while working, always hold the tool at the grey-coloured grip area(s)
- Always use auxiliary handle (can be adjusted )
- keep ventilation slots J 2 uncovered
- Do not apply too much pressure on the tool; let the tool do the work for you
4) APPLICATION ADVICE
Use the appropriate bits
•For drilling in concrete or stone a steady pressure on the drill is required
• When drilling ferrous metals
• Pre-drill a smaller hole, when a large hole is required
• Lubricate drill bit occasionally with oil
• Splinter-free drilling in wood
• Dust-free drilling in walls
• Dust-free drilling in ceilings
• Drilling in tiles without skidding
5
Publicidad
