inscabin DAB RADIO D8 Instrucciones De Operación página 15

lnstruction
⑤ Long press "Enter" key will pop up "Pair another device" and "iphone" (the name of the connected device),
if you select "Pair another device", short press "Enter" key to confirm, the machine will disconnect the current
device Connect and re-enter the pairing state. Long press the "Enter" key again, and "Pair another device"
and "iphone" will pop up. If you select "iphone", short press the "Enter" key to confirm, and the machine will
automatically connect to the "iphone" device.
UPnP function
inscabin IR-D8 can connect to a wireless network and use Windows operating system, Apple Mac or Linux
music player as the playback platform, that is, UPnP sharing to play songs; take the Windows media player of
the majority of users as an example, Windows Media Player 12 The supported playback formats are: MP3,
WMA, AAC and WAV.
Open UPnP to share your music <Take Windows Media Player 12 as an example>
1. Open the built-in (or downloaded) Windows Media Player of the computer, and add your favorite music to
the media library (how to use Windows Media Player to add music, please refer to Microsoft's media player
instructions).
2. Click "Media Stream" in the Windows Media Player window, select "Automatically allow devices to play my
media", and then accept "Automatically allow all computers and multimedia devices" to quickly turn on UPnP
for music sharing and playback (as shown in the upper right ).
3. You can also edit the name of the media stream and allow/block the device to play your music through
UPnP. Click on the "Other Streaming Options" in the Windows Media Player window to customize the media
library name (as shown in the figure below right) Point 1), so that users can quickly identify when inscabin
IR-D8 searches for media devices; in the display device column, you can also customize whether to allow a
specific device to play media stream music through UPnP (as shown in the figure on the right below) point).
[Note] It is recommended to replace the Chinese name with English for the name of the media stream to
facilitate identification when selecting a device.
① Power on and press "MENU" to enter the main interface, select the "Media Center" icon, short press the
"Enter" key to confirm, turn the SKIP+/- knob, select the "UPnP" item, and short press "Enter" to enter the
UPnP mode. Rotate the SKIP+/- knob to select your UPnP device (for example, UPnP:KENT-PC:Kent Liu:),
short press the "Enter" key to confirm the selection.
[Note] It may take tens of seconds to search for UPnP devices. If inscabin IR-D8 does not find UPnP devices,
the display will return to the "Media Center" menu.
② Select the music folder under the "UPnP:KENT-PC:Kent Liu:" device, short press the "Enter" key to confirm
the operation, the screen will display the song name, turn the "SKIP+/- knob" to move up/down to select the
song , Short press "Enter" to select a song to play.
③ When entering the interface of playing music, short press the "RIGHT" button to enlarge the song picture
information, and short press the "LEFT" button to return. Turn the "SKIP+/- knob" to return to the song list
interface, and short press the "Enter" key to play or pause.
④ Turn the "VOLUME+/- knob" to increase or decrease the volume. Short press the "MUTE" button to switch
mute on/off.
U disk playback function
① Power on and press "MENU" to enter the main interface, select the "Media Center" icon, short press the
"Enter" key to confirm, turn the SKIP+/- knob, select the "USB" item, and short press "Enter" to enter the USB
mode.
② When the machine reads the USB flash drive, it will display the songs in the USB flash drive, short press
the "RIGHT" key, the screen will display: Delete delete this song and Play play this song two options, short
press the "Enter" key to confirm the required To operate, short press the "LEFT" button to return to the
previous interface, turn the "SKIP+/- knob" to move to the song list, and short press the "Enter" button to
play.
15
English