Descargar Imprimir esta página

Alto Professional TS Serie Guia Del Usuario página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Important Safety Precautions
Please note: Alto Professional and inMusic are not responsible for the use of its products or the misuse of
this information for any purpose. Alto Professional and inMusic are not responsible for the misuse of its
products caused by avoiding compliance with inspection and maintenance procedures. If choosing to install
and use casters, you are responsible for the safe and proper installation. Alto Professional and inMusic take
no responsibility if casters are used. Please also refer to the included safety and warranty manual for more
information.
Caution: To reduce the risk of electric shock, do not connect the subwoofer to a power outlet while
the grille is removed.
Loudspeaker Mounting
Always install subwoofers in accordance with applicable electrical and building codes.
When using a pole in the pole cup on top of the subwoofer cabinet to mount a loudspeaker, ensure the
pole is rated to support the loudspeaker's weight. Also, observe all safety precautions specified by the
manufacturer.
Do not mount multiple loudspeakers on the same pole.
Always verify that the subwoofer is on a flat, level, and stable surface that can support the weight of the
subwoofer and any mounted loudspeaker and mounting equipment.
Inspect the subwoofer, pole, and associated hardware before each use and do not use equipment with
worn, damaged, or missing parts.
Always be cautious in windy, outdoor conditions. Do not attach banners or similar items to any part of a
loudspeaker system. Such attachments could act as a sail and topple the system.
Unless you are confident that you can handle the subwoofer's weight, ask another person to help you
with any setup needs related to the subwoofer and any mounted speakers and related accessories.
Make sure your cables are out of the way of performers, production crew, and audience so they will not
trip over them, pulling the loudspeaker off the stand or pole.
(Optional) Attaching Casters
In order improve the experience of transporting our subwoofers, the TS15S and TS18S come with inserts
(M6 x 1.0 mm) for easily attaching casters to the rear of the cabinet. If casters are desired, please purchase
3-inch, 76 mm x 44 mm (3.00" x 1.73") mounting pattern, 150 lbs.-rated, swivel or non-swivel casters.
Please follow all installation instructions from the caster manufacturer when installing.
Note: Do not reuse the screws provided with the TS Sub to install the casters. Please see the caster
manufacturer's guidelines for selecting appropriate screws for M6 x 1.0 mm inserts.
Sound Level
Permanent hearing loss may be caused by
exposure to extremely high noise levels. The
U.S.
Occupational
Administration
(OSHA)
permissible exposures to certain noise levels.
According to OSHA, exposure to high sound
pressure levels (SPL) in excess of these limits
may result in hearing loss. When using
equipment capable of generating high SPL,
use hearing protection while such equipment is
under operation.
Safety
and
Health
has
specified
Hours per day SPL (dB)
8
90
6
92
4
95
3
97
2
100
1.5
102
1
105
0.5
110
0.25 or less
115
Example
Small gig
Train
Subway train
High level desktop monitors
Classical music concert
Riveting machine
Machine factory
Airport
Rock concert
3

Publicidad

loading

Este manual también es adecuado para:

Ts12sTs15sTs18s