VISION MODE
You have the option to customize each channel to one of five vision modes.
Please Note: Your Camera's default setting is set to Smart Mode. If this is your preferred setting, skip this step.
From the live view, left click on the channel you wish to change > Select Light & Color
Select your preferred option and select "OK".
*Repeat for each channel.
1.
Infrared – The camera will record full color during the day and black and white at night.
2.
Daylight – The camera will always record in full color. The image quality during the night is solely reliant on
ambient light condition.
3.
Night – The camera will record in black and white during the day and night.
4.
Full Color – The camera will always record in color. At night, the white light will remain on to enable full color
recording.
5.
Smart – The camera will record in full color during the day. At night, the camera will record in black and white
however, when motion is detected, the white light will turn on for up to 60 seconds or as long as motion is
detected, enabling full color recording during the motion event.
Need Help? Visit DefenderCameras.com/support
> Open the Ircut Mode menu >
19