Publicidad
Idiomas disponibles
Idiomas disponibles
POWER
Operation starts when this button is pressed and stops when you
press the button again.
FAN SPEED SELECTOR
Use to set the fan speed to Low (F1), MED (F2), High (F3).
ON/OFF TIMER
- when the air conditioner is off, it can be set to automatically turn
Delay ON
on from 1 to 24 hours at its previous mode and fan settings.
- when the air conditioner is on, it can be set to automatically turn
Delay OFF
off from 1 to 24 hours.
OPERATION MODE SELECTOR
Everytime you push this button， it will toggle between Cool， Energy Saver， Fan, and Dry.
Compressor runs and cools the room. Use the
Cool -
set the desired temperature and circulation fan speed.
The fan stops when the compressor stops cooling.
Energy Saver
-
Approximately every 3 minutes the fan will turn on and check the room air
temperature if cooling is needed.
Fan circulates air but compressor does not run. Use the FAN button to set
Fan
-
the desired fan speed.
REMOTE CONTROLLER
Power
Temp
Fan Speed
Timer
Mode
and FAN buttons to
Publicidad
