Guardian DRILL BOOT 42114 Manual De Instrucciones página 3

English
Installation
Step 1

Insert the drill into the drill boot
and then tighten the cinching
strap using the cord lock (A).
Step 2

Wrap the belt strap around the
front of the drill handle.
Step 3

Tighten the belt strap (B) and ensure
the pin is threaded through a hole
and excess belt is tucked.
Step 4

Insert the tether loop under the orange
tensioning strap (C) as shown and tighten.
A
Alternative Configuration
Other battery configurations may be able
to utilize the drill boot as long as geometry
can be captured with the cinching strap (1).
Always attach the drill boot in such a
way that the tether loop is oriented away
from the business end of the tool (2).
B
3
1
C
2