Publicidad
Idiomas disponibles
Idiomas disponibles
MOUNTING OPTIONS
If there isn't an existing ETL listed mounting
box, then read the following instructions.
Disconnect the power by removing fuses or
turning off circuit breakers.
Secure the outlet box directly to the building
structure. Use appropriate fasteners and
building materials. The outlet box and its
support must be able to fully support the
moving weight of the fan (at least 50 lbs). Do
not use plastic outlet boxes.
Figures 1, 2 and 3 are examples of different
ways to mount the outlet box.
Note: You may need a longer downrod to
maintain proper blade clearance when
installing on a steep, sloped ceiling. (Fig. 3)
To hang your fan where there is an existing
fixture but no ceiling joist, you may need an
installation hanger bar as shown in Figure 4.
ANGLED CEILING
MAXIMUM 20° ANGLE
Recessed
outlet box
3
Outlet box
Figure 1
Outlet box
Figure 2
Provide strong
support
Ceiling
hanger
bracket
Figure 3
Outlet box
Figure 4
Publicidad
