ZKTeco MS10 Guía Rápida página 6

Step 3: Add the Device to the App
1.
Enable Bluetooth and Wi-Fi permissions
on your smartphone.
2.
Open the app, tap the "+" button on the
top right corner of the interface, and then
select the "Add Device" option.
3.
Tap the "Add" button once the device
pop-up has appeared. Follow the on-
s c r e e n p r o m p t s t o p a i r t h e d e v i c e
automatically.
4. You can manually change the name of the
device once the notification "Added
successfully" displayed on the mobile
app. To finish the process, tap the "Done"
button.
Note: If you have failed to connect your
device to Wi-Fi, press and hold the Reset
Button for 5 seconds until the LED begins to
flash blue, then repeat the above steps.
Installation
Installation Location
The device can be mounted on the wall. The
recommended installation height is 2m to
2.5m.
5