ZKTeco MS10 Guía Rápida página 7

Effective Detection Area:
2.2m
Installation Steps
After confirmation of a successful Wi-Fi
connection and normal working status, you
can select the required position to mount on
the device. There are two methods to install
the device:
Method 1: Installing with the Screws
1.
Drill two holes in the wall where the
mounting bracket's holes are located, and
then insert the plastic anchor into the
holes; anchors are required for walls made
of hard materials like concrete, brick, or
stucco.
2. Fix the mounting bracket onto the wall
with two screws.
6m
4m
2m
0
2m
4m
6m
2m 4m 6m 8m
0
3m
Top View
6m
Side View
6
8m