Cherubini TDS GOLD Instrucciones página 34

Sensor element
WINDTEC - Ref. A520007
To associate the sensor to the control unit, a remote control must be already memorised.
The setting sequence is the following:
+
A B
To delete the sensor from the control unit, an already programmed remote control must
be used. The deleting sequence is the following:
+
A B
For the complete description of the functions of these devices see the instruction booklet
that came in the box.
RUGIADA (TX RAIN-SENSOR)
Rugiada - Ref. A520016
ANEMOMETERS
WINDTEC LUX - Ref. A520008
B
DELETING
A
Power Supply 230 Vac
Set button
Wind-speed
SETTING
34
Set button
set
tuning
Sun-sensor
set
2 sec
set
2 sec
set
tuning