Bruder Mannesmann Werkzeuge 12750 Instrucciones De Uso página 7

Technical specifications
Voltage: 220-240 V~, 50/60 Hz
Fan power: 1200 W
Container: 25 l
Suction: 20 kPa
Weight: 5,5 kg
Protection class :
Sound pressure level: 72 dB(A)
Before the first use
Check all parts are complete when unpacking the unit. The permanent filter bag, accessories and the swivel castors
will be found inside the container. Please mount the castors, before you use the cleaner for the first time.
•
Remove the motor-housing from the container and take out the accessories.
•
Mount the castors to the container bottom.
•
Put the permanent filter into the container.
•
Put the motor housing onto the container and lock.
Operation
•
Attention: Never use the appliance without filter! Put one permanent-filter over the frame on the bottom of the
motor-housing.
•
Connect the plug of the powercord to the outlet of 230V~.
•
Switch ON.
Dry vacuuming
It is recommended to insert the permanent filter bag for dry-vacuuming.
•
Remove the motor-housing from the tank.
•
Put the permanent filter bag into the container.
•
Slightly press the reinforcing frame onto the seam of the container, until the frame will fit onto the seam of the
container on all sides.
Please note the following, when changing from wet to dry vacuuming
Vacuuming dry dust with wet or damp filters will make the filters impermeable and thus may damage them. Always
allow wet or damp filters to dry before next use.
Installing the filter bag
•
Unlock and remove the suction head.
•
Remove the permanent filter basket.
•
Connect the paper filter bag with the stam inside the tank
•
Insert the permanent filter basket.
•
Fit and lock the suction head.
Blower function
The bayonet connector of the suction-hose can be fastened in the exhaust-opening of the motor-housing.
•
Push the bayonet into the opening as far as it goes and secure by turning clockwise.
/ II
GB - 7