Listening To Ipod™ And External Sources; Listening To Your Ipod; Playing Back - Yamaha TSX-W80 Manual De Instrucciones

LISTENING TO iPod™ AND EXTERNAL SOURCES

Listening to your iPod™

For details on compatible iPod models, refer to "SPECIFICATIONS" (☞ P. 11).

■ Playing back

iPod indicator
■ Status indicator of transmitter
LED status
Lights up green
Flashes green
Flashes red
Flashes red 2 times
Off
y
The iPod indicator of SOURCE on the unit:
• lights up when wireless communication has been established.
• flashes if the status is other than above.
Note
If cutting/no sound occurs, refer to "TROUBLESHOOTING" (☞ P. 9).
6
En
Status indicator
The current status of the unit
Wireless communication between the unit and transmitter is established.
once Adjusting the volume level.
continuously Connection in progress, please wait.
once The volume of this unit is set to maximum or minimum.
2 seconds An unsupported iPod is connected.
continuously Error occurs. Remove the iPod from the transmitter, and connect again.
continuously The battery of the iPod is low.
An iPod is not connected or wireless communication has not been established.
1 Connect your iPod to the transmitter.
2 The status indicator blinks, and
wireless communication starts.
3 Set SOURCE to iPod.
4 Play the iPod.
y
• You can remove the iPod whenever you want.
• When music/video in the iPod is played back, this unit
turns the system on automatically and plays back the
iPod even if the unit is system off.
• To charge the iPod, set the iPod to the charging cradle
on the unit (☞ P. 2).
• You can control the volume by the iPod.
• This unit turns the system off automatically after a
while if the iPod is turned off or removed from the
transmitter when SOURCE is set to iPod.
Notes
• If an iPod to be connected to the transmitter is playing
back, playback of iPod stops.
• When using a microwave oven, wireless LAN or
cordless telephone, etc., sound may be cut. Place the
unit away from these devices.