Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1
1. Screw 1 cam bolt (A) into the pre-threaded hole on the left side panel (2).
2. Screw 1 cam bolt (A) into the pre-threaded hole on the right side panel (3).
3. Attach 2 metal hinges (G) to right side panel (3) by inserting 4 wood screws (F) through the holes
on the metal hinges (G) then tighten to right side panel (3).
STEP 2
1. Insert 4 wood dowels (C) into the holes on the ends of rear cross bar (5).
2. Insert 4 wood dowels (C) into the holes on the ends of shelf (4).
3. Attached left side panel (2) to rear cross bar (5) and shelf (4) by inserting wood dowels (C) into
the wood dowel holes and inserting 1 cam bolt (A) into the cam lock hole.
4. Insert 1 cam lock (B) into the cam lock hole on the shelf (4) then rotate clockwise to secure the
cam bolt (A) in place.
5. Repeat above steps to assemble the right side panel (3) to rear cross bar (5) and shelf (4).
Publicidad
