Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 7
1. Attach the door (7) to right side panel (3) by inserting 4 screws (F) through the holes on the
metal hinge then tighten to right side panel (3).
STEP 8
1. Place the template with drill hole position on the wall that you desire to hang the cabinet.
2. Drill 2 holes through the hole position on the template.
3. Insert 2 plastic anchors (L) into the holes.
4. Attach the cabinet in place with holes, then insert 2 long screws (M) through the holes on the back
of cabinet and tighten the cabinet to the wall.
Publicidad
