DiO DiOVDP-IP01 Guia De Inicio Rapido página 48

Wizard-Settings 3/4
Wizard-Settings 3/4
Indoor Station Type
Indoor Station Type
Floor
Floor
Room N°
Room N°
Previous
Previous
Wizard-Related Devices 4/4
Wizard-Related Devices 4/4
012020033
012020033
DIOVDP-IP01-05 192.168.1.26
DIOVDP-IP01-05 192.168.1.26
Previous
Previous
If the connection does not work, please follow the help instructions provided via this link:
5.2 Connection to the wireless network
You do not have to connect your unit to the wireless network. It is only used to add it into the smartphone app for remote control
purposes.
Select the settings menu from the home screen
Then select the Wi-Fi icon
Select your network from the drop-down list
6. Installing the app
The application is available for Android and iOS.
Search for and install the "Guarding Vision" app on Android Play Store or Apple Store, depending on the model of your
smartphone.
Open the application and create a user account by following the on-screen instructions.
6.1 Set-up via QR code
Select the settings menu from the home screen on your videophone monitor
Then select the configuration icon
Go to "Guarding Vision service parameters" to record the unit's QR code.
In the "Guarding Vision" app on your smartphone, select the "+" icon in the top right corner.
Select "Analyse code" from the drop-down menu.
Use your camera to scan the QR code on the videophone screen.
Indoor Station
Indoor Station
1
1
1
1
Next Skip
Next Skip
V2.1 Build 200402 Activate
V2.1 Build 200402 Activate
Finish
Finish
https://www.youtube.com/watch?v=njqwbwLijIo
from the left-hand menu.
Step 4
You can find out the stage number and the unit number if you are
installing multiple devices within a network.
This option is optional.
Step 5
Please wait 1 minute, until the outdoor unit is detected.
Attention! If the cables are correctly connected, the connection
between the 2 units will be made automatically.
It is not necessary to enter a serial number.