Publicidad
Idiomas disponibles
Idiomas disponibles
CHAPTER -3: USING YOUR FRIDGE FREEZER
Picture-1
Removing The chiller shelf;
• Open the cover fully. (Picture-1)
• Pull the chiller shelf out towards you. (Picture-2)
• Pull the wheels of chiller shelf up from the rail in order to remove it. (Picture-3)
Fresh dial
The fresh dial is located in the front of the crisper, should be opened when the
compartment is full. The humidity level will be controlled and food will keep
fresher for longer.
If you see condensation on the glass shelf you must open the fresh dial fully.
Visual and text descriptions on the accessories section may vary according which model you have..
Cleaning
• Make sure to unplug the fridge before starting to clean it.
• Do not wash your fridge by pouring water.
• You can wipe the inner and outer sides with a soft cloth or a sponge using warm and soapy water.
• Remove the parts individually and clean with soapy water. Do not wash in washing machine.
• Never use flammable, explosive or corrosive material like thinner, gas, acid for cleaning.
• You should clean the condenser with broom at least once a year in order to provide energy saving and increase
the productivity.
Make sure that your fridge is unplugged while cleaning.
Defrosting
Your refrigerator automatically defrosts. The water formed as a result of defrosting passes
through the water collection spout, flows into the vaporization container behind your
refrigerator and evaporates by itself in there.
Replacing LED Lighting
If your fridge freezer has LED lighting contact the Sharp help desk as this
should be changed by authorized personnel only.
Picture-2
EN -11-
Picture-3
sliding part
Evaporating
tray
Publicidad
