Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions – ClearCurve
Back Box Option
This BackBox has been shipped complete. Please follow
the installation instructions specific to the catalog part
that you ordered.
Back Box - Wall Mount
Tools Required: #2 Phillips head screwdriver, 1/8" Hex
allen wrench, torque wrench, tool for screw mounting
hardware (by other).
1.
Remove the front cover plate, quantity 8 phillips head
screws. Note that the screws should remain captive to
the cover plate. (Figure 12)
Figure 12.
2.
Attach the wedge plate to the front cover plate using
the 4 carriage bolts (Figure 13). Torque carriage bolts to
50 in-lbs.
Figure 13.
3.
Attach the BackBox to the wall using quantity 4 bolts
3/16" in size (by other). Use the proper bolt type for the
wall material. (Figure 14)
6
Cooper Lighting Solutions
IB516118EN
Installation instructions
Figure 14.
4.
Pull in the power wires from the back of the BackBox or
the side conduit holes (Figure 15).
2.88
[73]
Back
CONDUIT
1.25
HOLE
[13.8]
1.25
[13.8]
Figure 15.
5.
Install the front cover to the BackBox (Figure 12). Torque
screws to 20 in-lbs.
6.
Remove the bottom cover plate, quantity 4 phillips head
screws. (Figure 16)
Figure 16.
7 .
Hang CCW fixture to the wedge plate per the CCW wall
mounting instructions.
8.
Make power connections per the CCW instruction
sheet.
9.
Reinstall the bottom cover plate. Torque screws to 20
in-lbs. (Figure 16)
5.25
[133.4]
Ø.18
[4.6]
4 PLACES
3.00
[76.2]
Publicidad
