MaxxHome 20552 Manual De Usuario página 13

HEATER OPERATION - MODEL 20552 - 22215
NOTE: It is normal for the heaters to be turned on for the first time or when they are turned on after
they have not been used for an extended period of time, the heaters may give off some odor and
fumes. This will disappear if the heating has been on for a short time.
1.Power switch
2.Thermostat
Choose a suitable location for the stove, taking into account the above safety instructions. Plug the
heater into a suitable socket.
Turn the thermostat knob fully clockwise to the maximum setting.
Turn on the heating elements using the toggle switches on the side panel.
When the heating elements are on, the switches light up.
For maximum heat output, both switches should be on.
When the desired room temperature is reached, slowly turn the thermostat knob counterclockwise until
the thermostat audibly clicks off and the lights on the element switches appear to shine out.
After this, the heater keeps the air temperature in the room at the set temperature by switching on and
off automatically.
13