Troubleshooting; Technical Specifications - Caterlite CD274 Manual De Instrucciones

Troubleshooting

If your Caterlite appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The appliance is not working
Appliance does not reach set
temperature
Appliance heats up but indicator light
does not come on
Power indicator light comes on but
appliance does not heat up
Appliance slow to heat up

Technical Specifications

Model Voltage
CD274 220-240V
50Hz
GG198 220-240V
50Hz
GG199 220-240V
50Hz
Probable Cause
The appliance is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Thermal cut-out activated
Safety switch not located properly
Faulty thermostat
Faulty element
Build-up of fat on the element
Indicator light has expired
Faulty element
Faulty thermostat
Thermostat set incorrectly
Build-up of fat on the element
Temperature
°C
Power range (
3000W 130-190
2000W 130-190
2 x 2000W 130-190
Check the appliance is plugged in correctly
and switched on
Call Caterlite agent or qualified technician
Replace the plug fuse
Check power supply
Call Caterlite agent or qualified technician
Press re-set switch on rear of unit
Refit control/element unit
Call Caterlite agent or qualified technician
Call Caterlite agent or qualified technician
Clean the appliance
Call Caterlite agent or qualified technician
Call Caterlite agent or qualified technician
Call Caterlite agent or qualified technician
Check thermostat
Clean the appliance
Capacity Dimensions
)
(litres) h x w x d (mm)
8 280 x 342 x 408
3.5 210 x 233 x 400
2 x 3.5 210 x 416 x 400
UK
Action
Weight
(kg)
3
2.5
5
4